DIY Flooring Fixes Bristol

Gapping in laminate flooring is usually caused by one of three things: the planks weren’t acclimatised to the room’s temperature before fitting, the subfloor is uneven causing the joints to pull apart under pressure, or the room’s humidity has dropped significantly. We will assess the environment and re-click the boards correctly to close the gaps.

We carefully grind out the grout lines surrounding the damaged tile to isolate it. Then, we use a specialised technique to break the tile inward into small pieces, chisel it out gently, scrape the old adhesive, and set the new tile perfectly flush with the existing grid.

Generally, no. Pouring over a failed layer will likely result in the new compound cracking in the exact same places. We always grind down the compromised layer, re-prime the subfloor properly, and then apply a fresh, correctly mixed batch of self-levelling compound for a permanent fix.

Buckling occurs when the floor has nowhere to expand. We carefully remove the skirting boards or scotia beading, use a specialised oscillating tool to trim the edges of the laminate planks to recreate the mandatory 10mm expansion gap, and then reinstall the beading to hide the gap neatly.

Corrective work is priced based on the time required to diagnose the issue, the complexity of the dismantling or remediation, and the materials needed for the fix. We always provide a clear, transparent quote after reviewing photos or conducting a quick site visit, with no hidden fees.